With its unique texture and elegant color, fish belly white marble has become a favorite in the field of high-end decoration. This natural stone produced in Italy is widely used in various high-end places with its excellent physical properties and aesthetics, adding a sense of luxury and elegance to the space.
Orential Calacatta White chinese white marble
Chinese name: fish belly white
English name: Arabescato Corchia
Origin: Italy
Color: white
Volume density: 2.72g/cm3
Compression resistance: 139Mpa
Bending resistance: 7Mpa
Water absorption rate: 0.18%[3]
Material description
Fish belly white is a kind of white marble mined in Italy. This stone is deeply loved by designers and owners in terms of material, pattern, and smoothness. It is widely used in high-end hotels, high-end villas and other decoration materials.
Material advantages
Fish belly white has the characteristics of weathering resistance, corrosion resistance, durability, beautiful appearance, harmony and nature, and is widely loved by users.
Ideal quality
(1) White base, the whiter the better
(2) Fine lines, few lines, evenly distributed
(3) No yellow lines, yellow spots, gray spots, green spots
(4) No cracks
(5) No gray bands
You can refer to these points to check the quality level of the stone you purchased.
Scope of application
Floor, wall, countertop, etc.
Fish belly white does not require waterproof adhesive back reinforcement treatment. It only needs to carefully repair the cracks, fully polish and clean the stone surface. When the stone is more than 90% dry, soak or cross-roll to implement six-sided protection to ensure that it is fully saturated at one time. Let it stand for more than 24 hours and wipe off the residual medicine on the surface before delivery and installation.
Stone application selection:
Fish belly white marble belongs to dolomite marble, mainly calcium carbonate and magnesium, so in daily maintenance and management, special chemical agents should be used to make fish belly white marble more transparent and clear, while general marble crystal surface agents cannot achieve the transparency, smoothness, clarity and high gloss of fish belly white, especially employees who have not been professionally trained will make fish belly white unrecognizable, either yellowing or blackening. It is recommended that owners must choose a more professional stone maintenance company!
Before the grinding process, it is important to avoid thorough protection of the stone. Of course, this type of stone must also be thoroughly protected before paving, and the health period after stone paving must be sufficient for 28 days before seam repair and glue repair can be carried out!
Management focus:
Because white stone is more easily contaminated than other stones, it is recommended that in property maintenance, timely cleaning, dusting and daily maintenance of the stone surface should be strengthened, especially paying attention to the spillage of cola, wine stains, tea stains, carbonated beverages, toilet cleaners, 84 disinfectants and other substances!
If similar pollution is encountered, it needs to be cleaned within 10 minutes and the crystallization agent is added. If the corrosion is shallow, it is recommended to use renovation powder for polishing (special agents can also be used for crystallization) and then gradually polish to restore the gloss and clarity; if the corrosion is deep, it needs to be renovated.
Maintenance points:
Do not use crystallization powder and agents with strong acidity. You should use agents that can replace magnesium oxide inside the stone to enhance the light transmittance and anti-slip properties of the stone. Make the fish belly white stone into a clear crystal glaze effect. You can consider using glaze paste for maintenance!
The common property of white stone is that it is easy to be polluted and penetrated, so it is necessary to strengthen the waterproof, oil-proof and anti-fouling work of this type of stone during paving, grinding, maintenance and use!
Grinding renovation process:
1. Finished product protection, cleaning the site, and preparing the skin.
2. Apply silicone penetration protection:
3. Cut and fill the seams:
4. Sequential grinding:
5. Apply penetration protection again.
6. Polishing in accordance with the rules:
A. To ensure the purity of the white stone on site, it is recommended to wear colorless rubber-soled shoes (durable cloth slippers can be selected), and dust each time.
B. Dust twice, white pad bottom sealing general agent twice, and polish dry and evenly.
C. steel wool polishing agent to improve clarity twice.
D. steel wool polishing agent with lubrication and gloss enhancement twice. Of course, in order to keep the stone crystal surface for a longer time, this step can also choose paste crystal materials, such as JT-10 or JT-10B of Jietianmeidi, or VD Alliance glaze or Zhengyipin 100 degree series or Crystal Shield series products.
7. Repair the edges and corners, remove the protective film, and clean the site.
8. Acceptance and withdrawal.
Panda White Marble Bookmatch Slab Wall Shower Flooring
The maintenance and application of fish belly white marble requires professional knowledge and meticulous craftsmanship to ensure that it maintains its natural beauty and luster for a long time. The correct maintenance method can not only extend the service life of the stone, but also enhance its decorative effect. Therefore, choosing professional stone maintenance services and following scientific maintenance procedures are the key to ensuring that the fish belly white marble is in its best condition.