Marble tiles are also a kind of tile products that are first glazed, then fired and polished. Marble tiles have both the realistic effect of marble and the superior performance of tiles. What defects of natural marble does marble tile overcome? And what advantages does it have as a tile itself?

Carrara white marble mosaic inlay brass pentagon design

1. Impact resistance

Marble tiles are made by physical pressing and chemical firing, and have a hard texture. At the same time, they can be processed and cut according to the actual decoration requirements of consumers.

2. More wear-resistant

Marble tiles have a Mohs hardness of 4-5, and the surface is protected by glaze, making the product super wear-resistant.

3. High flexural strength

Marble tiles are made by physical pressing and chemical firing, and have a hard and dense texture. Generally, a car will not break when it slowly runs over the brick surface.

4. More stain-resistant

The surface of marble tiles is a glaze layer fired at high temperature, and stains cannot penetrate at all. After polishing, the surface is smooth and easy to clean.

5. Low water absorption

Because the glaze layer on the surface of marble tiles is dense and smooth, and the water absorption rate is less than 0.3%, marble tiles can be washed and cleaned with water.

6. No defects and color difference

Marble tiles are professionally produced, and the raw materials and processes are fully controllable, without defects and color difference.

7. Standardized production

Marble tiles are standardized industrial products. The size and specifications can be made according to requirements. The products are ready to use, the supply is stable, and the quantity can be delivered on time, and the construction period is guaranteed.

Finally, from the development history of building materials, the emergence of tiles is to replace stone. As marble tiles gradually develop and mature, the history of stone used in high-end places will be rewritten.

1. Realism

Stone grain restoration degree ≧99.9%
Realism is the life of marble tiles. Only marble tiles that can reproduce the appearance of real stones to the greatest extent are good marble tiles, and only high-quality marble tiles with stone grain restoration degree ≧99.9% are high-quality marble tiles.

2. Repeatability

The area of ​​non-repetitive stone texture is ≥ 5 square meters
Repetitiveness is an important characteristic of marble tiles. Marble tiles with rich textures will make the space appear smooth and natural, continuous, and bring a comfortable and wonderful visual enjoyment, while repeated textures will make the space appear stiff and dull. The area of ​​non-repetitive stone texture is ≥ 5 square meters, which is a necessary characteristic of good marble tiles.

3. Fine India

The brick surface is 360DPI 0 grid high-precision spray printing
Good quality tiles should not have problems such as grid and texture blur and mechanical printing marks. The surface texture of high-quality marble tiles should be 360DPI 0 grid high-precision spray printing.

4. Vitrification

Water absorption ≤ 0.05%
Water absorption is an important criterion for measuring the quality of marble tiles. Bricks with low water absorption are not easy to hide dirt and are easier to take care of. Super high-quality marble tiles should have a water absorption rate of less than or equal to 0.05%.

5. Hardness

Mohs hardness should be ≥6
The higher the Mohs hardness, the stronger the friction and pressure resistance. If the hardness of the tile is insufficient, the tile will be easily damaged. The Mohs hardness of the ultra-high-quality marble tile should be no less than 6.

6. Self-cleaning

The anti-fouling coefficient should be ≥5
The self-cleaning degree comes from the density of the glaze of the tile body. The higher the density, the more difficult it is for stains to penetrate into the tile. The anti-fouling coefficient should be greater than or equal to 5 to meet the requirements of ultra-high-quality marble tiles.

White and blue marble mosaic inlay gold brass wall tile

7. Density

Weight of tile per square meter ≧25Kg
For tiles of different brands and the same size, the higher the weight means the thicker the tile, the more sufficient the material and the higher the density. The density of marble tiles must meet the weight of tile per square meter ≧25Kg.