» Not slippery Marble Stone Shower Tray
Besides marble, other natural stones like granite ,quartzite or slate can be used to create shower trays。Natural stone provides an organic non-slip finish and allows for custom sizes。It feels substantial underfoot and looks expensive .
To clean and seal a marble shower tray, follow these steps:
-
Cleaning: Regularly clean the marble shower tray with a mild detergent and warm water to remove soap scum and dirt。To address stains, a thick paste made of baking soda and water can be applied to the stained area, covered with plastic wrap, and left to sit for 24 hours before wiping up with a soft cloth。For oil-based stains, mineral spirits or acetone may be necessary。
-
Drying: After use, dry the marble with a soft cloth or squeegee to prevent water from wearing on the sealant and causing stains。
-
Polishing: Polish the marble with a chamois cloth after cleaning to maintain its shine。
-
Sealing: Most marble is sealed before installation, but it will need to be retreated over time。The frequency of resealing depends on the color and usage, with darker colors typically requiring less frequent treatment than lighter ones。To seal, prepare the area by removing old sealant and cleaning the surfaces thoroughly。Apply masking tape to create clean lines and protect surrounding surfaces from excess sealant。Apply a fresh bead of sealant along the edges where the tray meets the walls and flooring，and smooth the sealant to ensure optimal adhesion。Remove the masking tape while the silicone is still wet，and allow the sealant to cure for the recommended time, usually 24 to 48 hours, before using the shower。After the curing period, inspect the sealant line for any gaps or uneven areas and apply additional sealant if necessary。Finally, clean your tools and dispose of waste materials properly